Determining the effect of finishing on leather structure using FTIR spectroscopy

This article investigates the influence of the leather finishing process on its structural properties using Fourier-transform infrared (FTIR) spectroscopy. The study involved a comparison of the infrared spectra of finished and unfinished leather samples. The measurements were carried out on a Shimadzu IRPrestige-21 FTIR spectrometer equipped with a Miracle accessory from Pike Technologies. Spectra for each sample were recorded in the range of 4000–400 cm⁻¹. The analysis was based on examining the main absorption bands (peaks) in the obtained spectra. The research was conducted in the "Structural and Biochemical Materials" engineering laboratory at the M. Auezov South Kazakhstan University. The results confirmed that the finishing process leads to a reorganization of chemical bonds and molecular changes in the material's surface layer. Specifically, it was established: formation of a polymer film on the surface of the samples, partial modification of the collagen structure and a reduction in the intensity of certain chemical bonds, a slight shift in the absorption bands of the amide group valence vibrations (–C=O, –NH) was observed, indicating a partial modification of the collagen chains. Thus, the obtained data prove that leather finishing causes a rearrangement of chemical bonds and molecular-structural changes in its top layer. The appearance of absorption bands in the range of 1735–1740 cm−1 on the surface of the finished sample indicates the formation of carbonyl (C=O) functional groups in its polymeric composition. Based on the results, further study and optimization of the composition of finishing materials are recommended to ensure the preservation of high quality and functional properties of leather.

1. Gondim R., Marinho R. and Conceic¸˜ao R. Tanning handmade leather tilapia (oreochomis sp.) from three natural tanning. Revista Brasileira de Higiene e Sanidade Animal 9(2), (2015): 172–184.

2. Sakmat J., Lopattananon N., Kaesaman A. Effect of fiber surface modification on properties of artificial leather from leather fiber filled natural rubber composites. Key Engineering Materials Volume 659, (2015): 378–382. https://doi.org/10.4028/www.scientific.net/KEM.659.378

3. Theis E and Goetz A. Chrome Tanning I. The role played by sodium chloride in chrome liquors upon chrome tanning. Industrial & Engineering Chemistry, 24(3), (1932): 304-307. https://doi.org/10.1021/ie50267a009

4. Wilson J and Kern E. Nature of the hide-tannin compound and its bearing upon tannin analysis. Journal of Industrial & Engineering Chemistry, 12(12), (1920): 1149-1151. https://doi.org/10.1021/ie50132a008

5. Yu, C.Z., Sun G.X., Guo S.W.; Exploration on the causes of Cr(VI) in leather. China Leather 31 (2002): 25-29

6. El-Khateeb M, Nashy E, Ghany N, et al. Environmental impact elimination of chrome tanning effluent using electrocoagulation process assisted by chemical oxidation. Desalination and Water Treatment, 65, (2017): 147-152. https://doi.org/10.5004/dwt.2017.20250

7. Suresh V, Kanthimathi M, Thanikaivelan P, et al. An improved product-process for cleaner chrome tanning in leather processing. Journal of Cleaner Production, 9(6), (2001): 483-491. https://doi.org/10.1016/S0959-6526(01)00007-5

8. Bowker R and Emley W. Comparative wear of chrome-tanned, vegetable-tanned, and retanned sole leather. Journal of Research of the National Bureau of Standards, 15(4), (1935): 363-368. https://doi.org/10.6028/jres.015.022

9. Han, Y.; Hu, J.; Xin, Z. Facile Preparation of High Solid Content Waterborne Polyurethane and Its Application in Leather Surface Finishing. Prog. Org. Coatings, 130, (2019): 8–16. https://doi.org/10.1016/j.porgcoat.2019.01.031

10. Thanikaivelan, P.; Rao, J.R.; Nair, B.U.; Ramasami, T. Recent Trends in Leather Making: Processes, Problems, and Pathways. Critical Reviews in Environmental Science and Technology, 35, (2005): 37–79. https://doi.org/10.1080/10643380590521436

11. Tamilselvi, A.; Jayakumar, G.C.; Sri Charan, K.; Sahu, B.; Deepa, P.R.; Kanth, S.V.; Kanagaraj, J. Extraction of Cellulose from Renewable Resources and Its Application in Leather Finishing. Journal of Cleaner Production. 230, (2019): 694–699. https://doi.org/10.1016/j.jclepro.2019.04.401

12. Marika Gargano, Anna Bacardi, Giovanni Sannia and Vincenzo Lettera. From Leather Wastes back to Leather Manufacturing: The Development of New Bio-Based Finishing Systems. 13(4), (2023): 775. https://doi.org/10.3390/coatings13040775

13. Larkin P. Infrared and Raman spectroscopy: principles and spectral interpretation. Amsterdam: Elsevier; 2017.

14. G.Ş. Aşirbekova, V.M. Janpaizova, E. Ramazan, M. Ezieva, B.S. Turakulov. Mystyñ modifikasiasymen öñdelgen trikotaj tañğyştyñ (fittex) jetıldırılgen qasietterın zertteu. Vestnik Almatinskogo tehnologicheskogo universiteta. 2025, №1, 143-152. https://doi.org/10.48184/2304-568X-2025-1-143-152

15. K. Bektaev i dr. İK-spektroskopicheskie issledovania struktury tekstilnyh materialov, okraşennyh prirodnymi krasitelämi. Vestnik Almatinskogo tehnologicheskogo universiteta. 2025, Tom 147, №1, 160-170. https://doi.org/10.48184/2304-568X-2025-1-160-170