Application of 3D modeling technologies in modern sportswear design

This article presents a detailed scientific analysis of the integration of advanced computer-aided three dimensional design (3D CAD) systems, such as CLO 3D and Browzwear, into the process of creating high-tech sports equipment. The research focuses on comparing the innovative 3D method with traditional two-dimensional design, assessing its fundamental impact on a complex of ergonomic indicators (including movement biomechanics and fabric pressure distribution), the aesthetic perception of the product, as well as the entire chain of production processes— from idea to prototype. The results of empirical research convincingly prove that the use of 3D modeling critically improves the anatomical accuracy of fit and functional comfort of clothing, reduces the design cycle by 3–4 times, lowers material consumption by an average of 15%, and virtually eliminates the need for numerous physical samples. Interactive virtual visualization significantly simplifies the process of rapid modeling, comparative analysis of design solutions, early defect detection, and strategic planning. Ultimately, 3D modeling technologies are not just a tool but a key transformational innovation that elevates the sportswear industry to a qualitatively new level, synergistically combining superior ergonomics, unprecedented operational efficiency, and principles of sustainable development.

1. Khakimzhonov I. Sh. Ispol'zovanie otkhodov dzhinsovoy tkani dlya sozdaniya novykh shveynykh izdeliy, ekologicheskiy i tekhnologicheskiy podkhod [Use of denim fabric waste for creating new garments: ecological and technological approach] // Vestnik Almatinskogo tekhnologicheskogouniversiteta. – 2025. – № 4. DOI: 10.48184/2304-568X-2025-4-195-200. (in Russian)

2. Khakimdzhanov I. Sh., Tashpulatov S. Sh. Struktura i funktsional'nye svoystva tekstil'nykh materialov, ispol'zuemykh v spetsial'noy odezhde dlya zashchity ot vysokikh temperatur [Structure and functional properties of textile materials used in protective clothing against high temperatures] // Universum: Tekhnicheskie nauki. – 2024. – № 3(120). (in Russian)

3. Khakimdzhanov I. Sh. Analiz model'nogo proekta na osnove oprosa, provedennogo s tsel'yu sozdaniya rabochey odezhdy dlya personala metalloobrabatyvayushchego predpriyatiya [Analysis of a model project based on a survey conducted for creating workwear for metalworking enterprise personnel]. – 2023. (in Russian)

4. Atadzhanov R., Tashpulatov S., Khakimdzhanov I., Radzhapova M., Cherunova I., Korabaev Sh. Issledovanie i razrabotka spetsial'noy odezhdy dlya zashchity ot teplovykh vozdeystviy [Research and development of special clothing for protection against thermal effects] // AIP Conference Proceedings. – 2024. – Vol. 3304. – P. 030027. DOI: 10.1063/5.0269163. (in Russian)

5. Rizzametova M., Tashpulatov S., Sodikova F., Matchanova G. Analiz gigroskopicheskikh svoystv materialov, ispol'zuemykh pri poshive spetsial'noy odezhdy [Analysis of hygroscopic properties of materials used in manufacturing special clothing] // AIP Conference Proceedings. – 2023. – Vol. 2789. – P. 040039. (in Russian)

6. Khakimzhonov I. Ergonomicheskie i dizaynerskie podkhody k kozhevennym i tekstil'nym materialam, ispol'zuemym v inter'ere avtomobilya [Ergonomic and design approaches to leather and textile materials used in automobile interiors] // Nauka i innovatsii v tekstil'noy i modnoy promyshlennosti. – 2025. – № 4. – S. 24–30. (in Russian)

7. Acar E., Guner M. Research on Problems and Consumer Expectations in Sportswear Products // International Journal of Research – Granthaalayah. – 2025. – Vol. 13. – P. 8–14. DOI: 10.29121/granthaalayah.v13.i11.2025.6426.

8. Kushwah N., Sharma B., Babel R., Jangir A. Advanced Technologies in Sportswear and Performance Textiles: A Comprehensive Review // Journal of Materials Science Research and Reviews. – 2026. – Vol. 9. – P. 468–476. DOI: 10.9734/jmsrr/2026/v9i2491.

9. Cheng P., Chen D. Investigation of the Impact of Comfort Perception on the Overall Comfort of Tight-Fitting Sportswear // Journal of Engineered Fibers and Fabrics. – 2025. – Vol. 20. DOI: 10.1177/15589250251356622.

10. S. Ms, S. Dr, N. Ms, P. Ms, R. Ms, M. Ms, R. Ms. Smart 3D Virtual Try-On System with Personalized AI Fashion Stylist // International Journal of Scientific Research in Engineering and Management. – 2026. – Vol. 10. – P. 1–9. DOI: 10.55041/ IJSREM61114.

11. Lin X. Integrating 3D and AI Fashion Technologies: University–Company Synergies in Shaping Future-Ready Professionals // The International Journal of Design Education. – 2026. DOI: 10.18848/2325-128X/CGP/A316.

12. Singh Dr. Revolutionizing Fashion: The Role of 3D Technology in Sustainable and Customized Apparel Design // International Scientific Journal of Engineering and Management. – 2025. – Vol. 4. – P. 19. DOI: 10.55041/ISJEM04954.

13. Yang J., Chan C., Luximon A. A Survey on 3D Human Body Modeling for Interactive Fashion Design // International Journal of Image and Graphics. – 2014. – Vol. 13. DOI: 10.1142/S0219467813500216.

14. Khodzhaeva K., Rasulova M., Rajapova M., Tashpulatov S. Innovatsionnye podkhody k formirovaniyu termozashchitnykh paketov odezhdy dlya pozharnykh [Innovative approaches to the formation of thermal protective clothing packages for firefighters]. – 2026. (in Russian)

15. Tyurin I., Tashpulatov S. Nauchnye osnovy tsifrovogo proektirovaniya i izgotovleniya odezhdy na osnove printsipov resursosberezheniya [Scientific foundations of digital design and garment manufacturing based on resource-saving principles]. – 2025. (in Russian)